Understand 100G Ethernet Standards

People want 100G Ethernet, meanwhile, they want to reduce the cost and increase the port density to the most. Driven by the combination of elements like that, 100G Ethernet standards and related optical transceivers have improved a lot in the past few years. As so many 100G Ethernet standards and package form factors are used, people might be confused by them easily. This post offers a detailed introduction about 100G Ethernet standards.

The first 100G Ethernet standard was approved in 2010. After that tremendous changes have happened in 100G technology in many aspects. The first generation of the 100G standards use the 10x10G lane in electrical signaling. For media signaling, some use 10x10G and some use 4x10G. The second generation 100G Ethernet standards apply 4x10G signaling for both electrical and media. In terms of transmission distances, different standards can support different transmission distance. Now there are more choices for transmission distances ranging from 1 meter to 40 kilometers. Meanwhile, the package form factors also changed a lot. The first 100G transceivers CFP is much larger than that of the new one QSFP28. To offer an intuitive way to illustrate these 100G Ethernet standards, I will list them in the following table.

Name	Distance	Media Type	Module Type	Media Signaling	Electrical Signaling	Standard
100GBASE-KP4	1m	Backplane	Backplane	4x25	4x25	June 2014 IEEE 802.3bj
100GBASE-KR4	1m	Backplane	Backplane	4x25	4x25	June 2014 IEEE 802.3bj
100GBASE-CR4	5m	Twinax Copper	CFP2, CFP4 QSFP28	4x25	10x10	June 2014 IEEE 802.3bj
100GBASE-CR10	7m	Twinax Copper	CXP, CFP2 CFP4, QSFP28	10x10	4x25	June 2010 IEEE 802.3ba
100GBASE-SR4	OM3: 70m OM4: 100m	Parallel MMF	CFP2, CFP4 CPAK, QSFP28	4x25	10x10	March 2015 IEEE 802.3bm
100GBASE-SR10	OM3: 100m OM4: 150m	Parallel MMF	CFP, CFP2, CFP4 CPAK, CXP	10x10	10x10	June 2010 IEEE 802.3ba
10x10-2km	2km	Duplex SMF	CFP	10x10	10x10	March 2011 10x10 MSA
10x10-10km	10km	Duplex SMF	CFP	10x10	10x10	August 2011 10x10 MSA
100GBASE-LR4	10km	Duplex SMF	CFP, CFP2, CFP4 CPAK, QSFP28	4x25	10x10	June 2010 IEEE 802.3ba
10x10-40km	40km	Duplex SMF	CFP	10x10	10x10	August 2011 10x10 MSA
100GBASE-ER4	40km	Duplex SMF	CFP, CFP2	4x25	10x10	June 2010 IEEE 802.3ba

The above table contains the 100G standards that published by IEEE and MSA, which are listed by the transmission distance from the top to the bottom. According to reports from many marketing reports, 100G optical component market will surge in 2016. FS.COM provide 100G solutions including transceivers, patch cable, cable management products, etc. Kindly contact sales@fs.com or visit FS.COM for more details about 100G Ethernet and products, if you are interested.

This post is originally published at: http://www.fiber-optic-tutorial.com/understand-100g-ethernet-standards.html