How to Connect Cisco Nexus 9396PX to 40G Network

Both devices and network architecture should be consider during data center upgrade. With the driven of applications like Cloud, Internet of Things, and virtual data center, it is clear that 10G can no longer satisfy the application needs. Migrating to 40/100G is an urgent problem. Cisco Nexus 9396PX switch, as one of the first member of Cisco Nexus 9000 series platform, can support 40G transmission with flexibility and high density. However, the problem is that many customers do not know how to get there to make full use of these devices. This post will give a detailed description about how to connecting Cisco Nexus 9396PX switch to optimized network architecture.

Optimized Network Architecture—Spine-Leaf Architecture

The traditional network usually used a three tier network architecture. However, with the migration of 40/100G, a new architecture is taking place of the traditional one with great advantages. This is known as spine-leaf architecture. Compare with the traditional three tier network architecture, spine-leaf uses a two-tier mode as shown in the above picture. Several most obvious advantages of spine-leaf architecture are list as following:

• spine-leaf network is more adaptable to the continuous change of data center. This is because an additional Spine switch may be added and uplinks may be extended to every Leaf switch, resulting in the addition of interlayer bandwidth and reduction of the oversubscription.
• Spine-leaf network can create high density cabling environments depending on the scale of the network.
• Using a two-tier mode, spine-leaf network can reduce the overall signal latency through the elimination of a switching layer.

Connecting Cisco Nexus 9396PX to 40G Spine-Leaf Network

To make full use of the given source, spine-leaf architecture is suggested. As shown in the above picture, the Cisco Nexus 9396PX is a 2RU non-blocking Layer 2 and 3 fixed switch offering 48 ports of 1G SFP/10G SFP+ and 12 ports of 40G QSFP+. Cisco Nexus 9396PX switch is suggested to be used as the leaf switch in 40G spine-leaf network. Cisco Nexus 9396PX is suggested to be used as leaf switch in 40G spine-leaf network. In spine-leaf network architecture for 40G application, the connections between the spine switches and leaf switches are 40G, while connections between the leaf switches and servers are usually 1/10G. Thus these 40G QSFP+ ports can be used to connect the spine switch and the 1G SFP/10G SFP+ are suggested to connect servers and routers. To accomplish the whole spine-leaf connection, optics and cables or DAC (direct attach cable) should be used. The following picture shows a 40G spine-leaf architecture with Cisco Nexus 9396PX being used in the leaf layer and the fiber cabling choice for Cisco Nexus 9396PX switch in this architecture.

Cisco Nexus 9396PX Cabling Solution

Using the fixed switch Cisco Nexus 9396PX with spine-leaf architecture can greatly increase the network scaling capability and adaptability. Detailed information about modules and cables that can be used with Cisco Nexus 9396PX are listed in the following chart.

Connection	Option 1: Optics & Cable		Option 2: DAC
Spine to leaf (40G connection)	QSFP-40G-SR4	MMF, OM3/OM4, MPO patch cable	QSFP-H40G-AOC (1m to 10m are available) QSFP-H40G-CU (1m to 5m are available) QSFP-H40G-ACU (7m to 10m are available)
	QSFP-40G-SR4-S
	QSFP-40G-CSR4
	QSFP-40GE-LR4	SMF, LC duplex patch cable
	QSFP-40G-LR4
	WSP-Q40GLR4L
	QSFP-40G-LR4-S
	QSFP-40G-ER4
Leaf to server (1/10G connection)	SFP+ Optics		SFP-10G-AOC (1m to 10m are available) SFP-H10GB-CU (1m to 5m are available)
	SFP-10G-SR	MMF, LC duplex patch cable
	SFP-10G-SR-S
	SFP-10G-LR	SMF, LC duplex patch cable
	SFP-10G-LR-S
	SFP-10G-ER
	SFP-10G-ER-S
	SFP-10G-ZR
	DWDM SFP+
	SFP Optics
	GLC-T (1000BASE-T)	RJ-45, Cat 5
	SFP-GE-T
	GLC-SX-MMD	MMF, LC duplex patch cable
	GLC-SX-MM
	GLC-LH-SMD	SMF, LC duplex patch cable
	GLC-EX-SMD
	GLC-LH-SM

All the products mention in this chart can be customized according to your applications in Fiberstore (FS.COM). They will be fully tested in Fiberstore Test Center before they go to the market. Kindly contact sales@fs.com for more details.

Source: http://www.fiber-optic-tutorial.com/how-to-connect-cisco-cisco-nexus-9396px-to-40g-network.html